Hyperbaric Oxygen Chamber

 

An Oxygen Conservation System that provides the following benefits:

  1. Up to 65% less oxygen consumption per treatment compared to conventional Chambers
  2. Reduced supply requirements when providing oxygen for multiple chamber installations
  3. 95% oxygen level within 10 minutes in the chamber under any operating conditions
  4. Reduced noise levels during the pressure plateau.
  5. A Comfort Profile that compresses the chamber at a variable rate
  6. The ability to monitor the internal chamber temperature in Celsius or Fahrenheit.
  7. Accurate selection of pressures and rates with a resolution of 0.1 psig.
  8. Operator selected pressure values of ATA, psig, kPa or MPa
  9. Built-in up and down timers with audible reminder beeps.
  10. Two built-in internal nozzles located on the inside of the chamber door that can direct gas flow to the patient
  11. New chamber/stretcher design that will be able to support patient weights up to 700lbs (318kg).
  12. New larger blank plug located on the chamber door face which can be utilized by clinicians to adapt to different HBO monitoring systems
  13. Approved by following standards:
  • FDA
  • ASME PVHO-1, Safety Standards for Pressure Vessels for Human occupancy
  • ASME Boiler and Pressure Vessel Codes, Section VIII, Division I, Pressure Vessels
  • NFPA 99 Health Care Facilities
  • Registered with the National Board of Boiler and Pressure Vessel Inspectors
  • U.S. FDA Requirement, 21 Code of Federal Regulations, Part 820
  • ISO 13485: 2003 Quality Assurance Standard for Medical Devices
  • CMDCAS – Canadian Medical Conformity Assessment System
  1. Two emergency mode:
  • Standard Emergency vent system
  • Emergency Shut-off and Automatic Vent system
  1. E.R.O system:
  • Data storage system
  • 15 inches screen
  • Ability to save or print data